PROJECTS
Oil Refinery required to increase their security at the main gates.
The existing entrance had barrier arms for vehicular entry and exit and flat barriers for pedestrian control.
The requirement was to raise the security level to high security and they were interested in bi-folding gates. Access Security and Control researched the equipment available and imported three high-speed bi-folding gates from Europe. These gates utilise motors that drive all four leaves. Most importantly they open and close quickly and safely and there is no danger of a person or vehicle being caught or squashed. The gate systems use photo-beams and two safety ground loops for each gate.
For pedestrian control Access Security & Control imported two double full height bi-directional turnstiles manufactured in 316-grade stainless steel.
These systems were designed to complement the Refinery’s access control and muster system so that staff are counted onto and off the site through the gates and the turnstiles.
High Security Site
This site had a Tecom Challenger system with a security and proximity card access control and wished to move to a higher level of control. We removed the existing control keypads and installed finger readers on the Tecom on a wiegand protocol. The finger readers also sit on the company Ethernet and the user templates are distributed around the finger readers on the TCP/IP network.
Dulux
Orica Powder Coating wished to install a security system to meet operational, security and health and safety regulations. Orica had a factory and warehouse over two adjoining sites. They reviewed existing systems and elected to install a Concept 4000 access controller and a series of controlled doors in the two buildings. Orica wished to regiment traffic flow around the building and installed a traffic barrier at the rear, also on the Concept system.