Swing Gates

Sommer Twist 350

The powerful swing gate operator for gates with up to 4 m wing width


The powerful swing gate operator for gates with up to 4 m wing width

Like the twist 200 E and twist 200 EL, the twist 350 can be used anywhere: for gates opening to the left or right, in 1- or 2-leaf operation. And all that in an elegant design at up to 4 m wing width or 700 kg door wing weight.


Safety thanks to high load capacity
Thanks to the patented brake system, the gear motor is protected from mechanical overload. The operator withstands extreme force effects of up to 2 tonnes, e.g. due to wind load or vandalism or break-in attempts, without a problem.

Optimal application of force through soft running
Efficient application of force guarantees controlled soft running in ramp form which prevents unnecessary power loss.

Functions which make daily life easier
The walk-through function can be used to open a gate wing and reach the property by bike, for example. This makes an additional garden gate unnecessary, making it possible to fully utilise the whole width of your driveway.
With the automatic closing function, you can be sure that the gate is always locked behind you. After the photo eye is passed, the gate automatically closes after a set time.

Accident prevention through electronically controlled force measurement
The operator learns on its own and runs in the currently most economical way thanks to the DPS (Dynamic Power System). It adapts to the environment and always moves at the same speed. For the operator, obstacles mean that it suddenly needs more force. In this case, it stops or reverses. This prevents injury and damage to property.

Safety due to automatic locking
If there is an attempt to slide the operator, it counteracts the force with automatic locking. Even with closed gates that are exposed to strong wind, the operator automatically pushes against the wind.

Power failure – what now?
To open your gate when there is a power failure, the mechanical emergency release can be activated manually with a key. Even if there is strong contact pressure on the operator, the release lock can be triggered with low application of force and you can get to your property.

Thought out to the last detail
Since the cable outlet is not on the underside, damage caused by pulling on the floor is prevented. This enables a lower mounting height on the stable gate bottom beam. Better transmission of force and better appearance are the result.

The large and the small gate wing
If the active gate wing is small, you typically can use a weaker operator than with a large gate wing. You can save money and space for an oversized operator by taking advantage of the option of combining operators.
Mixed operation is possible with the twist 200 E/EL and twist XL operators*.

* twist 200 E/EL operators and twist 350-/XL control units can only be operated in combination with the “twist XS” conversion set.


Descriptiontwist 350
Gate wing weight:Max. 700 kg**
Gate wing width:Max. 4.0 m***
Travel length:450 mm
Power supply:AC 220 … 240 V
Motor voltage:DC 24 V
Rated frequency:50/60 Hz
Temperature range:–30°C to +70°C
Protection class:Operator: IP44
Control unit: IP65

** With max. gate wing width of 1.5 m, 1-wing system
*** With max. gate wing weight of 250 kg,1-wing system